www.rfm.com e-mail: info@rfm.com page 1 of 2 ?2008 by rf monolithics, inc. SF2069A-1 - 6/26/08 electrical characteristics characteristic sym notes min typ max units nominal center frequency ( @ 25c ) f o 1 95.9 96.00 96.1 mhz minimum insertion loss attenuation 14 16 db passband min 1db , b 1db 4.3 5.0 mhz amplitude ripple (p-p) 2.40mhz 0.8 1.5 db group delay ripple 2.40mhz 80 125 ns relative attenuation (relative to min) 40 to 87 mhz 43 48 db 111 to 150 mhz 50 55 db operating temperature t a 1-40 +85c impedance matching to 50 unbalanced external l-c case style smp-75 19 x 6.5 mm nominal footprint lid symbolization ( yy = year, ww = week) rfm SF2069A-1 yyww ? low insertion loss ? hermetic 19 x 6.5 mm surface-mount case ? complies with directive 2002/95/ec (rohs) absolute maximum ratings rating value units maximum incident power in passband +10 dbm max. dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +150 c suitable for lead-free soldering - max. soldering profile 260c for 30 s 96.00 mhz saw filter SF2069A-1 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified d emonstration board with impedance matching to 50 w and measured with 50 network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is depe ndent on pcb layout and external impedance matching design. see application note no. 42 for details. 4. "lrip" or "l" after the part number indicates "low rate initial production" and "eng" or "e" indicates "engineering prototype s." 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. pb smp-75 caution: electrostatic sensitive device . observe precautions for handling. notes:
www.rfm.com e-mail: info@rfm.com page 2 of 2 ?2008 by rf monolithics, inc. SF2069A-1 - 6/26/08 case dimensions dimension mm inches min nom max min nom max a 18.80 19.00 19.30 0.740 0.748 0.760 b 6.30 6.50 6.80 0.248 0.256 0.268 c 1.75 2.00 0.069 0.079 d 2.29 0.090 e 1.02 0.040 h 1.0 0.039 p 1.905 0.075 electrical connections connection terminals port 1 hot 10 ground return 1 port 2 hot 5 ground return 6 case ground all others single ended operation return is ground differential operation return is hot materials solder pad termination au plating 30 - 60 inches (76.2-152 m) over 80-200 inches (203-508 m) ni. lid fe-ni-co alloy electroless nickel plate (8-11% phos- phorus) 100-200 inches thick body al 2 o 3 ceramic pb free 10-terminal ceramic surface-mount case 19 x 6.5 mm nominal footprint smp-75 case a b c h p (8 places) e (10 places) 6 7 8 9 10 5 4 3 2 1 d top view bottom view 5 4 3 2 1 6 7 8 9 10
|
